Chitongda YL-007M2 Manual do Utilizador descarregar pdf (Página 8)

Choose the most suitable installation place and angle according to actual

situation and taking the following installation diagram as reference to

ensure the detection effect is best.

 Please do not fix it under direct sunlight or other strong

lights and also keep it away from places with frequent strong air stream.

 If the low-power indicator is on, please change the battery.

[Function Settings]

1. Initialization

Please insert SIM card and plug in power adaptor, and then power on the

system, all the LED lights will be on for 2 seconds and you will hear a

long beep; the system comes into initialization. After the time clock

displays on the LCD screen, the [SGM] starts flashing and the main unit

starts to detect the GSM network until a long beep. Then the [SGM]

indicator goes out indicating the system comes into disarm status.

Finally, turn on the backup battery switch.

2. Enter Settings

In the state of disarm, input 4-digit password by the keypad on the main

unit and press [#] button to confirm. You will hear a voice prompt: please

enter instruction. At the same time, [SET] indicator is on without flashing

and [0000] displays on the screen, indicating the system enters setting

status. You can perform different settings repeatedly as long as the system

keeps in setting status. The system will exit setting mode and return to

disarm status if you don’t press any keypad button for 40 seconds.

Note: In setting status, press can delete the numbers input

The system default password is [8888].

Operating method: [XXXX][#]

X indicates the new 4-digit password.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Sem comentários

Chitongda YL-007M2 Manual do Utilizador Página 8